1 . Diaphragm jig Overview

Rectangular box type of action roadside jigger There are two types . A jig is a left side compartment manner is another way to clamp the right side of the compartment . The clamp has a fixed screen. It is available in the separation of metal ores Gold Mining Machine, such as tungsten and gold placer tin ore and mineral processing , it can be isolated not only fines but also rough . The maximum feed size of 6-8 mm , but it can be a few cases under 12 mm .

2.Diaphragm fixture structure and description

LTS300 × 450 rectangular box type of action roadside jigger mainly by the fixture , drives, water distribution , diaphragm and faucet . There are two clamps of different sizes and barrels each having a membrane area of ​​the jig and divided by a partition diaphragm area . Rubber diaphragm pump to the medium ( water ) movement is jigging process. V-belt drive motor connected by a large pulley

Eccentric gear and rocker lever is moved up and down . Another link with the rubber diaphragm is moved up and down is connected to the fixture .

Depending on the size of the ore , we can change the link of the trip, and select a different itinerary to make the best jigging action . Per minute to change the itinerary method to exchange a smaller pulley but there are two strokes per minute : 322R / m ; 420R / M. Defining the screw is loose and the cap screws , and remove the intestinal eccentric adjusting the relative position of the screen to move the eccentric shaft, in order to have 11 different strokes ( 0 - 25.3 mm ) .

Because additional work on sieve screen , the clamp can be non-uniform size of the material treated . ( Note: The screen can be requested or not ) . The feed is supplied to the clamp chamber ore , the ore is separated from the pulsation of the diaphragm layers in different media . Light weight but sink fixture container through a space of the barrel and the artificial bed of the sieve material , but the light but in the rough washing medium to the screen from the discharge end . Because the back jig chamber is 50mm lower than the previous jigging chamber , the light of ore through room after room in front of an overflow jigger , jigging again. If desired, where the end plate can be adjusted to control the discharge amount . Concentrate in the tank regularly discharged through the discharge tube .

3 . Diaphragm Jig technical parameters :

Posted by: wang8291131 at 09:24 AM | No Comments | Add Comment
Post contains 454 words, total size 3 kb.