Center driving thickener are for the drainage of mediocre and tailing slurries in mineral processing practice. They are also used to concentrate and purify all the porridge, the solids in industries such as coal, chemicals, building materials and source of water and wastewater treatment.

This type of Gold Mining Equipment is considered for drainage of middlings and tailings at the treatment works. It turns the sludge concentration of 20-30% to about 40-70% for the further operation so as to improve effects dressing. Such thickeners are widely used in industries such as metallurgy, chemical - used, coal, ore - dressing, and environmental protection. They have features like reliable operaton and easy maintenance.

The sludge goes into the basin concentration by the steady flow drum. Solid particles sink to the bottom of the basin. They are then scraped off in the middle or the pelvic floor and automatically loaded by the sand pump or by the discharge mouth. The clarified liquid overflows from the overflow weir in the upper part.

Posted by: wang8291131 at 02:12 AM | No Comments | Add Comment
Post contains 538 words, total size 21 kb.

Slurry Pump Product Description:

The ZJ series dregs thick liquid pumps is the our company according to the market demand, the absorption domestically, outside the advanced technology develops the design of series product. Pump uses the outstanding water power model design, high efficiency, the performance is good. The double pump housing structure is the rate service conveniently. This product engineering factor corresponds " to pump centrifugal type Dregs thick liquid to " JB/T8096-1998 the standard.

Speed ​​: electrical machinery straight association transmission 2900/1480/980/730/590 / r / min

Between the pulley of the union transfer corresponds to the customer

Can reach General < = 80 ℃ 110 ℃ Special: Medium Temperature

Solid fluid mixture weight concentration: Mortar density < = 45 % Pulp density < = 60%

Current Capacity Fan Zhuan: 30 - 2000m3 / h

Removes the range: 15 - 30m

Horizontal Type

The flexible coupling straight association transmission ( requests under 160kW be possible to customer pulley variable transmission to use )

Having to pump Export is possible according to his to turn 4Directions after 90 ℃ gaps ( usually deliver goods exported vertically upward to be )

As required, connect it to the pump using

Sand Pump| Under the SP series fluid the dregs thick liquid pumps

Product Description:

Under the SP fluid the dregs thick liquid pumps for vertical centrifugal pumps dregs thick liquid, immersed below the liquid used in transport, the wholesomeness, the thick tablet, the highly concentrated dregs thick liquid. Does each axis must with the seals of the Wasserachseabdichten, is not sufficient in the absorption amount under the operating mode Can also normal work. SP pump, the float part are made of the wear-resistant metal. SPR pumps submerged below the liquid spare parts, bring the Gummiaußenverkleidungzu, is suitable for the transport of non- edges and corners of wholesomeness dregs thick liquid. After the dregs thick liquid pond filling level the different length of the pump drive shaft or intake pipe can be selected. Uses many kinds of speeds and the many types of aberrations induced manner, under the best operating mode moves, pump service life long, the movement benefit is high, many kinds of bad transport can fulfill condition.

Especially suitable for the transport of aggression, the large pellets, the highly concentrated dregs thick liquid. Widely applies for department and so on metallurgy, mine, coal - electricity, building materials, environmental protection.

SP pumps is the vertical centrifugal pumps dregs thick liquid pumps theater entrance is vertical vertical under which export to another page, the pump will turn up. Upside pump mainly filters the outline, the pump casing, the impeller, the axis of less than, the protection board, components, and so forth support consists, pumps, the bearing supporting the pump installed in the liquid, do not to seal each axis, the part, flowed to the Anti-friction material.

This sand pumping the transmission pattern is BD and the DC two types, namely leather belt transmission and straight connecting transmission. Immersed below the depth of the liquid is possible, to the extent standardize according to the actual needs of the user to decide.

Posted by: wang8291131 at 02:11 AM | No Comments | Add Comment
Post contains 523 words, total size 5 kb.

Description:

This placer Gold Mining Plant flow Chat is developed by our experienced engineers, based on its installation and consulting experience for the gold mining companies in many countries. it is made ​​of perforated drum, centrifugal dressing machine ( Nelson centrifuge ), laundry chute, shaking table and conveyor belt.

Advantages: This plant design get many competitive advantages that our customers are extremely high returns.

First, large capacity. As high as 100 tons / hour, to give a crude oil processing capacity of 800 tons per day.

Secondly, low price. EXW price is about 56000 usd for the 50 ton / hour plant.

Third. Easy to install and operate, all devices in this system is complete machine that can be easily installed, and this machine is also very easy to set up and operate.

And our gold washing plant the most important, the effectiveness of this plant. you can easily find the precious gold in concentrate when you test the production.

The devices were used:

1. Trommel screen

2. Jig separator / centrifugal concentrator / sluice / vibrating table.

3. Belt conveyors.

Posted by: wang8291131 at 02:41 AM | No Comments | Add Comment
Post contains 191 words, total size 3 kb.

description.

The Gold scrubber washing machine is a machine washing and grading function.

application

The rotary scrubber is always in processing minerals such as ferrous metals including hematite and magnetite and nonferrous metals such as lead, zinc, gold and silver etc, especially for the washing of Gold Mine Equipment ore with sticky clay inside.

advantage

First This gold-diggers washing machine have a very strong ability crumbled sticky clay. Manganese-iron with many sharp shape is well mounted in the drum, in order to increase the ability of the decay of the sound.

Second This machine will get a high capacity 200 t / h could reach to meet other

3rd This machine is designed by our experienced engineer, with a very stable performance, and very easy to use.

4th There are many models, and also we can make this machine according to special requirement of the customer.

Parameter

Details of rotary scrubber washing machine

Posted by: wang8291131 at 02:40 AM | No Comments | Add Comment
Post contains 236 words, total size 10 kb.

Description:

Wet Mill Machine is a traditional grinding mill machine, which was newly developed. The traditional wet mille was with the hard rock round plate for grinding, driven by cow or donkey. The modern wet mill machine is with the iron miller and electric motor.

application:

The wet mill machine has been widely used for Gold Mining Plant before , usually it is to the grinding of hard rock gold ore was used , and at the same time mixing the mercury to the concentration of gold. And this equipment uses a number of times to grind the small stone powder.

advantages:

The wet mill machine has many advantages , compare the ball mill machine :

1 Easy to install and operate : this machine is very simple, only the electric motor , gearbox, frame and iron miller.

2.Easy for maintenance and wear and

3.Low price and low operating costs

4.Small in size, easy to move and uninstall

Posted by: wang8291131 at 02:06 AM | No Comments | Add Comment
Post contains 161 words, total size 2 kb.

Detailed Product Description

Grinding steel ball:

1 High hardness;

2 Abrasion resistant;

3 Long life.

Grinding balls: 20 ~ 130mm

Chemical composition (%): C: 2.3 to 2.4, Si: 1.5max, Mn: 0.5-1.5, Cr: 1.0-3.0, P: 0.1 max, S: max 0.1

Grinding steel ball:

Applied areas: cement building materials, metal mining, Gold Mining Equipment, coal paste thermal power plants, chemical, ceramic coating, light industry, magnetic materials.

Specification

The Product Description

Chemical Composition

Posted by: wang8291131 at 02:05 AM | No Comments | Add Comment
Post contains 194 words, total size 8 kb.

Coarse jaw crusher is widely used in Gold Mining Plant, metallurgical industry, building material, highway, railway, water and chemical industries. Different materials with compressive strength less than 350 MPa can be crushed.

Posted by: wang8291131 at 09:24 AM | No Comments | Add Comment
Post contains 172 words, total size 8 kb.

1. Profile

Hammer crusheris one of the main types of equipment of crushing limestone , coal or brittle materials under medium hardness in industrial departments such as metallurgy , building materials - chemical, water and electricity . It has features , including large crushing ratio , high production capacity , uniform particle size crushed products etc.

Our company is now engaged in the design and production of hammer crusher Gold Mining Equipment for more than thirty years. Our products are made of advanced product structure , smooth operation and low energy consumption. Our company has a series of hammer crusher, which are also made by users at home and abroad.

2. Work Principle

Hammer crusher crush materials by the action . The crushing process is influenced by the rapidly rotating hammer When the materials get into the crusher, they disintegrate , the crumbled materials then gain kinetic energy from the hammer and running towards the baffle and grill bar at a high speed , at the same time the materials falling into each other and are collapsed for many times ; materials , which is narrower than the gap between the grate bars are out of the gap , while larger materials crumble after affects , sanded and re-extruded bar on the grate before being squeezed out of the gap through the hammer in order to obtain products of the required particle size.

Hammer crusher can be divided into reversible ones and not reversible . The rotors turn the hammer crushers are reversible. Such hammer crushers are usually used for fine crushing Used . The rotors of the non-reversible hammer crushers are not reversible. Such hammer crushers are typically used intermediate crushing .

3. main structure

Such hammer crusher mainly composed of frame , rotor, grate bar , beater plate , actuating device , etc.

Posted by: wang8291131 at 09:23 AM | No Comments | Add Comment
Post contains 307 words, total size 3 kb.

1 . Diaphragm jig Overview

Rectangular box type of action roadside jigger There are two types . A jig is a left side compartment manner is another way to clamp the right side of the compartment . The clamp has a fixed screen. It is available in the separation of metal ores Gold Mining Machine, such as tungsten and gold placer tin ore and mineral processing , it can be isolated not only fines but also rough . The maximum feed size of 6-8 mm , but it can be a few cases under 12 mm .

2.Diaphragm fixture structure and description

LTS300 × 450 rectangular box type of action roadside jigger mainly by the fixture , drives, water distribution , diaphragm and faucet . There are two clamps of different sizes and barrels each having a membrane area of ​​the jig and divided by a partition diaphragm area . Rubber diaphragm pump to the medium ( water ) movement is jigging process. V-belt drive motor connected by a large pulley

Eccentric gear and rocker lever is moved up and down . Another link with the rubber diaphragm is moved up and down is connected to the fixture .

Depending on the size of the ore , we can change the link of the trip, and select a different itinerary to make the best jigging action . Per minute to change the itinerary method to exchange a smaller pulley but there are two strokes per minute : 322R / m ; 420R / M. Defining the screw is loose and the cap screws , and remove the intestinal eccentric adjusting the relative position of the screen to move the eccentric shaft, in order to have 11 different strokes ( 0 - 25.3 mm ) .

Because additional work on sieve screen , the clamp can be non-uniform size of the material treated . ( Note: The screen can be requested or not ) . The feed is supplied to the clamp chamber ore , the ore is separated from the pulsation of the diaphragm layers in different media . Light weight but sink fixture container through a space of the barrel and the artificial bed of the sieve material , but the light but in the rough washing medium to the screen from the discharge end . Because the back jig chamber is 50mm lower than the previous jigging chamber , the light of ore through room after room in front of an overflow jigger , jigging again. If desired, where the end plate can be adjusted to control the discharge amount . Concentrate in the tank regularly discharged through the discharge tube .

3 . Diaphragm Jig technical parameters :

Posted by: wang8291131 at 09:24 AM | No Comments | Add Comment
Post contains 454 words, total size 3 kb.

Description:

OG Spiral separator is a gravity concentrator, according to their relative movement in response to the separation of different specific gravity minerals gravity, centrifugal force and other forces in the fluid medium. It has a very good performance and processing beaches, river, sea and sand flow effect. Jiangxi Shicheng Mine Machinery Factory helix is made ​​of polyurethane lined with fiberglass wearable corundum inner surface. Generally have five rounds beginning, single, double, triple and four-start capability of each column can meet quality requirements.

Application:

Rutile, ilmenite and zircon concentration.

Iron ore, chromite and manganese ore.

Tin, tantalum ore concentration.

Gold, copper and base metals natural recovery.

Silica sand processing.

Titanium magnetite concentrations.

Features and Benefits:

Reasonable structure, small footprint.

Recovery, high efficiency, and the precise separation Gold Mining Equipment.

Weight, corrosion resistance and light hurry.

Simple installation and maintenance requirements.

Low operating cost and long service life.

With minimal operator attention and reliable operation.

Adaptable feeding amount, density, size and grade of the fluctuations.

Posted by: wang8291131 at 09:23 AM | No Comments | Add Comment
Post contains 170 words, total size 2 kb.